CONTACT US NOW
* If you are unable to CALL or TEXT, please send your request for our services here and we’ll respond to finish scheduling.
* indicates required field.
Authorized Service Center for:
Services & Equipment We Service
From basic maintenance to electrical diagnosis and carb work.
SERVICES...
- General Repairs
- Electrical Diagnosis/Repair
- Periodic Maintenance
- Mower Full Service
- “Winterization”
- Valve Adjustment
- Blade / Chain Sharpening
- Oil Changes
- Carburetor Cleaning / Synchronization
- Battery Testing/Replacement
- Tire Changes
- Welding Repair
- Customize/Modify/Upgrade
ALL GAS & ELECTRIC MAKES AND MODELS OF...
- Trimmers & Blowers
- Push / Riding / Zero-Turn Mowers
- Pressure Washers
- Tractors & Tillers
- Chainsaws / Pole Saws
- Generators
- Snow Blowers
- Log Splitters / Chipper-Shredders
- Cut-Off Saws / Augers
- Dirtbikes / ATVs / UTVs / Golf Carts
- Kerosene / Diesel Heaters
- Mini-bikes / Go-karts
- And more!
Current Pricing
Pricing subject to change. No surprise shop fees. All shop supplies and waste disposal included in hourly rate; parts are separate.
Labor Rates
* A minimum labor charge of $40 applies to each machine inspected or serviced, even if no repair is completed. This is a minimum billing amount, not an additional fee, and counts toward the total labor charge.
Lawn & Garden: $75/hr
Powersports/Motorcycles/Scooters: $95/hr
Automotive/Welding: $100/hr
Diagnosis: Diagnostic labor is provided at no additional charge with any customer-authorized repair. If the customer declines the recommended repair, diagnostic labor will be billed based on the actual time spent diagnosing the issue at the applicable hourly labor rate.
* Taxes and fees included automatically where applicable. Credit card payments are subject to a 3% fee.
Pickup & Dropoff
$80 round trip within 10 minutes • $100 round trip 11–20 minutes
$50 one-way within 10 minutes • $60 one-way 11–20 minutes
One-way service includes either pickup or delivery. Round-trip service includes both pickup and return delivery. Pricing is based on travel time from our shop.
Pickup is curbside. If equipment cannot run or be driven onto the trailer, an additional loading fee may apply based on the time required. Any added fee will be discussed in advance.
We ONLY pickup/dropoff WITHIN a 20 minute (~10 mile) radius of our shop.
* during this time of year, we prioritize machines that customers bring to us, and pickup/dropoff is NOT guaranteed to be available or timely.
On-Site Work
On-site repairs are available for select equipment that cannot reasonably be transported to our shop. Availability depends on the equipment and the type of repair required.
Standard hourly labor rates apply, plus a one-time on-site service fee of $100. Please contact us to discuss your needs.
Consignment
We can help sell your equipment through consignment.
Our commission is 20% of the final selling price, subject to a minimum commission of $150.
Offers at or above 75% of the agreed asking price may be accepted at our discretion. Offers below that threshold require the equipment owner's approval.
* Equipment kept on consignment for more than 10 days is subject to a $10 daily storage fee until sold.
FAQs
Quick answers to common questions.
What is the turn-around time for repair/service? ▾
Turnaround times vary based on our current workload, the condition of your equipment, and parts availability. Repairs requiring special-order or backordered parts may take longer. Equipment is generally scheduled in the order received, but delays in obtaining parts can affect its place in the repair queue. Please contact us for the current estimated turnaround time. If you need expedited service, let us know in advance and we will discuss availability.
What do you NOT service/repair? ▾
We DO NOT rebuild electric motors (YES WE DO FIX ELECTRIC MACHINES), and we DO NOT rebuild hydraulic pumps/motors/cylinders (we DO service fluids).
We DO NOT service or repair boats, wave runners, jet skis, or snowmobiles at this time.
Do you offer a warranty? ▾
Yes, unless otherwise specified, a 7 day limited warranty on workmanship issues. If it doesn’t work as intended from our repair/service, we’ll take another look free of charge. Parts not produced/fabricated by BSER are subject to manufacturer warranty.
How much will it cost to service or repair my machine? ▾
Pricing details are listed above. If you’re unsure, contact us and we’ll point you in the right direction. Pricing may vary and is subject to change.
Can I wait at your shop while you service/repair my machine? ▾
We currently DO NOT allow customers to wait in our shop while we perform service/repair. You may wait in your vehicle in our parking lot.
I’m dropping off my machine — can you help load/unload? ▾
We DO NOT drive/ride/control any machines on/off customer trucks or trailers for liability reasons.
We DO help load/unload smaller equipment (push mowers, generators, pressure washers, etc.).
Please confirm with us in advance if you may need help. We have a forklift for larger machines.
What payment methods do you accept? When do I pay? ▾
We accept credit/debit (credit cards have a 3% fee), cash, check (up to $300), Venmo, Zelle, and Apple Pay. Payment is due AT or BEFORE pickup by customer, or dropoff to customer — no exceptions.
Can I return parts I purchased from you? ▾
Returns are accepted within 30 days for new & unopened products that are not discontinued. Discontinued, open-box, or used parts are not returnable.
What happens if you find another issue with my equipment? ▾
If a new/unrelated issue is found during service/repair, we will always notify you before proceeding with any extra work.
What happens if I don’t pick up my equipment? ▾
Please arrange pickup promptly after we notify you that your equipment is ready. Equipment not collected within 10 days of that notification may incur a $10 daily storage fee. Unclaimed equipment will be handled in accordance with applicable law and our service terms; it is not automatically sold or disposed of after a set period.
About
Owner/Operator • Billy Timm
Since I was a kid, I’ve always been fascinated by how things work — and I’ve taken just about everything apart. My passion for small engines began with helping my dad mow the lawn on our old riding mower. In 2018, I bought my first go-kart to work on as a father-son project, and from that moment, my love for engines turned into an obsession.
Over the years, I spent countless hours fixing, tinkering, and learning everything I could about small engines. In 2021, I decided to turn that passion into something more when I realized how many people I could help — and that’s how Billy’s Small Engine Repair was officialy started.
While many shops are quick to say “just replace it,” I take pride in first finding a cost-effective repair solution if possible. I enjoy rebuilding and repairing what others might give up on, many times on older brands and models worth being saved. No matter the age or condition of your equipment (cost & time permitting), I’ll do my best to bring it back to life before calling it a loss (cost permitting!). Im happy to say its been 8 years of helping customers fix machines!!
* If you have questions about your equipment, don’t hesitate to reach out. I’d be happy to help even if not providing services to your equipment.